Bevel gear flanged pulp knife gate valve

1. This valve is driven by bevel gear to realize opening and closing.

2. The knife gate is positioned above the seals and does not contact the fluid.

3. Double-seat design enables bi-directional flow and sealing. No flow direction of the medium needs to be considered during installation, and there is no flow direction arrow or seat side arrow on the valve body.

◆ Body Material: Ductile iron, carbon steel

◆ Rubber Material: Natural rubber (black rubber), LAD special rubber, EPDM, NBR, etc.

◆ Knife Gate Material: 304, 316, 2205, etc.

◆ Operating Temperature: -40℃ ~ +150℃

◆ Nominal Pressure: 0–0.4 MPa

◆ Size Range: DN50 ~ DN800 (extra-large sizes can be customized separately)

◆ Flange Standards: GB, DIN, JIS, ANSI, GOST, etc.